Barcode Commands; Gs H N Select Print Position For Hri Characters; Gs F N Select Font For Hri Characters; Gs H N Select Barcode Height - SNBC BTP-R580II Programming Manual

5, 6
[Relative] DLE EOT, GS a

2.6 Barcode commands

GS H n Select print position for HRI characters

[Function] Select the print position for HRI characters when printing a barcode.
[Format] ASCII
Hex
Decimal 29
[Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Notes] n specifies the print position for HRI characters as follows:
• HRI characters are the characters used to make notes for barcode.
• The font of HRI characters is specified by GS f command.
[Default] n = 0
[Relative] GS f, GS k

GS f n Select font for HRI characters

[Function] Select a font for HRI characters when printing a barcode.
[Format] ASCII
Hex
Decimal 29
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Notes] Use n to select a font as follows:
• HRI characters are the character used to make notes for barcode.
• HRI characters are printed at the position specified by GS H.
[Default] n = 0
[Relative] GS H, GS k

GS h n Select barcode height

[Function] Select barcode height
[Format] ASCII
Hex
Decimal 29
7 0 00
GS H n
1D 48 n
72 n
n
0, 48
1, 49
2, 50
3, 51
GS f n
1D 66 n
102 n
n
0,48 Standard ASCII characters (12 × 24)
1,49 Compressed ASCII characters (9 × 17)
GS h n
1D 68 n
104 n
Undefined.
0 Not used, fixed to 0.
Print position
Not printed
Above the barcode
Below the barcode
Both above and below the barcode
Font
- 44 -
BTP-R580II Programming Manual