Esc Sp N Set Right-Side Character Spacing - SNBC BTP-R580II Programming Manual

1B 4C (Enter page mode)
1B 57 00 00 00 00 20 02 E8 00 (Set printing width and height in page mode)
31 32 33 34 35 36 37 38 39 30 61 62 63 64 65 64 66 67 68 69 6A 6B 6C 6D 6E 6F 70
71 72 73 74 75 76 77 78 79 7A 31 32 33 34 35 36 37 38 39 30 61 62 63 64 65 64 66
67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 31 32 33 34 35 36 37
38 39 30 61 62 63 64 65 64 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77
78 79 7A 31 32 33 34 35 36 37 38 39 30 61 62 63 64 65 64 66 67 68 69 6A 6B 6C 6D
6E 6F 70 71 72 73 74 75 76 77 78 79 7A 31 32 33 34 35 36 37 38 39 30 61 62 63 64
65 64 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 31 32 33 34
35 36 37 38 39 30 61 62 63 64 65 64 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74
75 76 77 78 79 7A 31 32 33 34 35 36 37 38 39 30 61 62 63 64 65 64 66 67 68 69 6A
6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 31 32 33 34 35 36 37 38 39 30 61 62
63 64 65 64 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79
1B 57 44 00 10 00 7C 01 AA 00(Set the size of page needed to be deleted)
18 (Delete data in page buffer)
1B 24 64 00 (Set absolute horizontal print position as 100 dots)
1D 24 60 00 (Set absolute vertical print position as 96 dots)
43 61 6E 63 65 6C 20 74 68 65 20 64 61 74 61 20
0A 0C (print)
Result:

ESC SP n Set right-side character spacing

[Function] Set right-side character spacing.
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ n≤255
[Notes] • Set the character spacing for the right side of the character to [n×horizontal or
vertical motion unit] inch.
• When characters are enlarged, the right-side character spacing is enlarged the same
times.
• This command sets values independently in standard mode and page mode.
• The horizontal and vertical motion units are specified by GS P. Changing the
horizontal or vertical motion unit does not affect the current right-side spacing.
• In standard mode, the horizontal motion unit is used.
• In page mode, the horizontal or vertical motion unit is selected depending on the print
ESC SP n
1B 20 n
32 n
BTP-R580II Programming Manual
- 16 -