Mx Bin Stack Sensor Pcb Assy - Brother HL-L5000D Service Manual

11.8 MX bin stack sensor PCB ASSY

(1) Release each harness from the securing fixtures.
(2) Remove the two taptite bind B M3x10 screws, and remove the MX bin stack sensor holder
and the MX bin stack actuator. (4 places)
Taptite bind B M3x10
MX 4bin stack sensor holder
MX bin stack actuator
Harness routing: Refer to
(3) Release the two hooks, and remove the MX bin stack sensor PCB ASSY from the MX
bin stack sensor holder. Disconnect the MX bin stack sensor harness from the MX bin
stack sensor PCB ASSY. (4 parts)
MX bin stack sensor holder
Fig. 3-135
"10. Left side of the MX".
Fig. 3-136
3-142
MX 3bin stack sensor holder
MX 2bin stack sensor holder
MX bin stack sensor PCB ASSY
MX bin stack sensor harness
Hooks
MX 1bin stack
sensor holder
Confidential