Pf Kit Mp - Brother HL-L5000D Service Manual

2.4 PF kit MP

(1) Push the front cover release button, and open the front cover ASSY.
(2) Open the MP roller cover. Release the hook on the MP holder bushing, and slide the MP
holder bushing in the direction of the arrow 2.
(3) Slide the MP roller holder ASSY in the direction of the arrow 3 to remove it from the MP
separation roller shaft. Then remove the MP roller holder ASSY.
(4) Raise the MP separation pad ASSY to the 50-degree position, and remove it in the
direction of the arrow 4.
(5) Remove the MP separation pad spring.
MP separation
roller shaft
MP roller cover
Assembling Note:
• Attach the MP roller holder ASSY while pushing the MP separation pad ASSY.
MP roller holder ASSY
3
MP holder bushing
MP roller cover
MP separation pad spring
Front cover ASSY
Fig. 7-19
7-14
Hook
2
MP separation
pad ASSY
50°
4
Front cover release button
Confidential