Brother HL-L5000D Service Manual page 63

Error message
First line
Paper Low Paper Low Tray 1
Paper Low Tray 2
Paper Low Tray 3
Paper Low Tray 4
Paper Low Tray 5
Print Data Full Secure Print Data is full.
Press Stop[x] Key and
delete the previously
stored data.
Print Unable 01 Turn the power off and
then back on again.
Print Unable 02 Turn the power off and
then back on again.
Print Unable 03 Turn the power off and
then back on again.
Print Unable 04 Turn the power off and
then back on again.
Print Unable 05 Turn the power off and
then back on again.
Second line
Detected that the paper is running out
when the paper feed motor drive and
T1 paper empty sensor turned ON.
Detected that the paper is running
out when the paper feed motor,TT
motor drive and T2(LT or TT) paper
empty sensor turned ON.
Detected that the paper is running out
when the paper feed motor,TT motor
drive and T3(LT or TT) paper empty
sensor turned ON.
Detected that the paper is running out
when the TT motor drive and T4TT
paper empty sensor turned ON.
Detected that the paper is running out
when the TT motor drive and T5TT
paper empty sensor turned ON.
The memory size allotted for
Secure Print was exceeded when
saving Secure Print data.
An error occurred at the motor
drive circuit in the main PCB.
Main PCB detected an error in the
paper feed motor.
Main PCB detected an error in the
eject motor.
Main PCB detected an error at the
polygon motor in the laser unit.
Main PCB detected an error at the
polygon motor in the laser unit.
Detected the fuser unit
temperature error.
2-37
Description
Error Refer
codes to:
--- 4.11.4
--- 4.11.4
--- 4.11.4
--- 4.11.4
--- 4.11.4
C800 2-82
0102 2-42
0201 2-42
0203 2-42
0300 2-43
0401 2-43
0501 2-44
0502 2-44
0503 2-44
0504 2-44
0505 2-44
0506 2-44
0508 2-44
050A 2-45
050B 2-45
050C 2-45
Confidential