Brother HL-L5000D Service Manual page 277

(2) Remove the screw cup M3x8 screw (black) to remove the MX FG harness R, and
release it from the securing fixtures.
(3) Disconnect all the harnesses connected to MX relay PCB ASSY, and release them from
the securing fixtures of drive frame MX. Release each hook, and remove the MX relay
PCB ASSY.
MX switching solenoid harness
Screw cup M3x8 (black)
MX FG harness R
Drive frame MX
Harness routing: Refer to
MX 3bin switching solenoid harness
Hooks
Fig. 3-124
"11. Right side of the MX".
3-132
MX relay PCB harness
MX 2bin switching solenoid harness
MX 1bin switching
solenoid harness
MX relay
PCB ASSY
Confidential