Brother HL-L5000D Service Manual page 94

 Error code 7B03
The MX 2bin stack sensor does not detect paper pass within the specified time after the MX
jam lower sensor detected paper pass.
<User Check>
• Remove the jammed paper.
• Close the MX back cover correctly.
Step
Foreign object in the rear of the
1
machine
MX flapper 1 or 2 attachment
2
failure
MX 2bin stack actuator
3
attachment failure
Connection failure of the MX
4
flapper 2 solenoid harness
Connection failure of the MX
5
2bin stack sensor harness
Connection failure of the MX
6
relay PCB harness
7 MX 2bin stack sensor failure
MX flapper 1 or 2 solenoid
8
failure
9 MX relay PCB failure
10 MX control PCB failure
11 Main PCB failure
Cause
Remove the foreign object.
Reattach the MX flapper 1 or 2.
Reattach the MX 2bin stack actuator.
Reconnect the MX flapper 2 solenoid harness.
Reconnect the MX 2bin stack sensor harness.
Reconnect the MX relay PCB harness.
Replace the MX 2bin stack sensor.
Replace the MX flapper 1 or 2 solenoid.
Replace the MX relay PCB ASSY.
Replace the MX control PCB ASSY.
Replace the main PCB ASSY.
2-68
Remedy
Confidential