Mx Control Pcb Assy - Brother HL-L5000D Service Manual

11.4 MX control PCB ASSY

(1) Disconnect all the harnesses and flat cables connected to the MX control PCB ASSY.
(2) Remove the four taptite bind B M3x10 screws. Release the hook, and remove the MX
control PCB ASSY.
MX motor flat cable
MX control PCB harness
MX 1bin stack
sensor harness
MX jam lower harness
MX 2bin stack sensor harness
MX 2bin detection sensor harness
Harness routing: Refer to
Taptite bind B M3x10
MX control PCB ASSY
MX control PCB ASSY
Fig. 3-128
"9. Left side of the MX (MX control
3-136
Hook
MX back cover sensor harness
MX relay PCB harness
MX 4bin detection
sensor harness
MX 4bin stack sensor
harness
MX 3bin stack sensor harness
MX jam upper harness
PCB)".
Confidential