Brother HL-5590DN Quick Setup Manual

HL‑5580D / HL‑5585D / HL‑5590DN / HL‑5595DN
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner
Cartridge Assembly
Quick Setup Guide
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Installation CD‑ROM
Product Safety Guide
Discard the silica gel pack.
Adjust the paper
guides.
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
NOTE:
• The available connection interfaces vary depending on the model.
• Use the appropriate interface cable for the connection you want to use. (Network
cable and Parallel cable are not standard accessories.)
USB Interface Cable
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
(For HL‑5590DN / HL‑5595DN)
Reference Guide
Please purchase a straight‑through Category 5 (or greater) twisted‑pair cable
for the machine.
Parallel cable
(For HL‑5580D)
Please purchase the optional parallel cable (PC‑5000) for the machine.
• The illustrations in this Quick Setup Guide show the HL‑5595DN.
Remove the orange part.
CHN‑ENG
Version 0