Brother HL-L5050DN Quick Setup Manual

HL‑L5050DN
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner
Cartridge Assembly
Watch our Video FAQs for
help with setting up your
Brother machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
4
Select your language (if needed)
1.
Press ▼ or ▲ to select [General Setup], and
then press OK.
2.
Press OK to select [Local Language].
3.
Press ▼ or ▲ to select your language, and then
press OK.
4.
Press Cancel.
Installation CD‑ROM
Quick Setup Guide Product Safety Guide
Discard the silica gel pack.
Adjust the paper
guides.
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
NOTE:
You must purchase the correct interface cable for the interface you
want to use.
USB cable
AC Power Cord
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
Secure Network Access
Your machine's default password is on the label on the
back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
Remove the orange part.
D01KZ5001-00
UK
Version B