Brother HL-5595DNH Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. HL-5595DNH
  6. Manual

Brother HL-5595DNH Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product Safety Guide
Please read this guide before attempting to operate the product, or before attempting any
maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical
shock, burns or suffocation. Brother shall not be liable for damage caused where the product
owner has failed to follow the instructions set out in this guide.
How to use this guide:
1 Read the whole guide before using your product and keep it for later reference.
2 Carefully follow the instructions set out in this guide and always ensure that you follow all
warnings and instructions marked on the product.
3 If you have concerns about how to use your product having read this guide, please refer to
Brother customer service or your local Brother dealer.
4 To ensure you understand all of the instructions, study the symbols and conventions used in
the documentation.
5 CAUTION:
Before using this product, read carefully these instructions for correct operation.
(HL-5580D / HL-5585D / HL-5590DN / HL-5595DN / HL-5595DNH /
MFC-8530DN / MFC-8535DN / MFC-8540DN)
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
A
Brother Industries, Ltd.
A
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HL-5595DNH and is the answer not in the manual?

Questions and answers

Related Manuals for Brother HL-5595DNH

Summary of Contents for Brother HL-5595DNH

  • Page 1 Failure to follow these instructions may result in an increased risk of fire, electrical shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner has failed to follow the instructions set out in this guide.

  • Page 2: Symbols And Conventions Used In The Documentation

    Symbols and conventions used in the documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Text in the Courier New font Courier identifies messages on the WARNING indicates a potentially hazardous LCD of the product.

  • Page 3: Compilation And Publication Notice

    This manual has been compiled and published to provide the latest product safety information at the time of publication. The information contained in this manual may be subject to change. For the latest manual, please visit us at http://support.brother.com. Choose a safe location for your product WARNING Choose a location where the temperature remains between 10°C and 32°C, the humidity is...
  • Page 4 DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the product’s ventilation could create a risk of overheating and/or fire. • Keep a minimum gap around the product as shown in the illustration. (HL only) 150 mm 150 mm...
  • Page 5 • DO NOT place your product next to sources of interference, such as speakers or the base units of non-Brother cordless telephones. Doing so may interfere with the operation of the product's electronic components. • Disruption of power can delete information from the product’s memory.

  • Page 6: General Precautions

    General precautions WARNING Plastic bags are used in the packing of your product. To avoid danger of suffocation, keep these plastic bags away from babies and children. Plastic bags are not toys. For users with pacemakers This product generates a weak magnetic field. If you experience any unusual symptoms with your pacemaker while near the product, move away from the product and consult a doctor immediately.
  • Page 7 DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside the product. Prolonged contact of paper with the fuser unit may cause a fire. DO NOT use a vacuum cleaner to clean up scattered toner. Doing this may cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire.
  • Page 8 CAUTION (HL only) When moving the product, hold it by grasping the handholds at the bottom firmly from the front of the product. (MFC only) This product is heavy and weighs more than 16.5 kg. To prevent possible injuries at least two people should lift the product by holding it from the front and back.
  • Page 9 Obtain immediate medical attention. Wash out mouth with water and give 200 - 300 ml (half a pint) of water to drink. For more safety information regarding the toners used in your product, please visit the following web address to read the Safety Data Sheets (SDS) http://sds.brother.co.jp/sdsapp/index.html.
  • Page 10 IMPORTANT DO NOT remove or damage any of the caution or warning labels inside the product.

  • Page 11: Connecting The Product Safely

    Connecting the product safely WARNING There are high voltage electrodes inside the product. Before you clean the inside of the product, make sure you have unplugged the telephone line cord first (MFC only) and then the power cord from the electrical socket. Doing this will prevent an electrical shock. DO NOT use the AC power cord to pull or push the plug into the wall socket, use the finger grips on the plug.
  • Page 12 Installation must be performed correctly according to the user's guide. Brother strongly recommends that you DO NOT use any type of extension cord. DO NOT allow any type of liquid to come into contact with the plug or power socket.

  • Page 13: Important Safety Instructions

    • This equipment may not be used on coin service lines provided by the telephone company or connected to party lines. (MFC only) • Brother cannot accept any financial or other responsibilities that may be the result of your use of this information, including direct, special or consequential damages. There are no...

  • Page 14: Servicing The Product

    Brother dealer. If the product has been dropped or the casing has been damaged, there may be the possibility of an electric shock. Unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer.

  • Page 15: Disconnect Device

    THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on...
  • Page 16 IEC60825-1:2014 Specification (For 220-240V Models Only) This product is a Class 1 laser product as defined in IEC60825-1:2014 specifications. The label shown below is attached in countries where required. This product has a Class 3B Laser Diode which emits invisible laser radiation in the Laser Unit.
  • Page 17 Notes on Using the Wireless Network Models 1 For Wireless LAN Function of the Equipment Operating frequency: 2.4 - 2.4835 GHz  Equivalent isotropic radiated power (EIRP): ≤ 100 mW  Maximum power spectral density: ≤ 20 dBm / MHz (EIRP) ...

  • Page 18: Lan Connection (Network Models Only)

    LAN connection (Network models only) CAUTION DO NOT connect this product to a LAN connection that is subject to over-voltages. Radio interference This product complies with EN55022 (CISPR Publication 22)/Class B.
  • Page 19 Trademarks BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. Windows, Windows Vista, Windows Server and Active Directory are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh, iPad, iPhone, iPod touch and OS X are trademarks of Apple Inc., registered in the United States and other countries.

  • Page 20: Open Source Licensing Remarks

    Open Source Licensing Remarks This product includes open-source software. Please visit the Brother Solutions Center at http://support.brother.com to view the Open Source Licensing Remarks and Copyright information. Copyright and License ©2018 Brother Industries, Ltd. All rights reserved. This product includes software developed by the following vendors: ©1983-1998 PACIFIC SOFTWORKS, INC.

  • Page 21: Unlawful Use Of Copying Equipment (Mfc Only)

    Unlawful use of copying equipment (MFC only) It is an offence to make reproductions of certain items or documents with the intent to commit fraud. The following is a non-exhaustive list of documents which it may be unlawful to produce copies of.
  • Page 22 CHN-ENG www.brotherearth.com Version A...

This manual is also suitable for:

Hl-5585dHl-5590dnHl-5595dnHl-5580dMfc-8530dnMfc-8535dn ... Show all

Table of Contents