Brother HL-L5000D Service Manual page 42

Error
Description
codes
8601 ―
8602 ―
8603 ―
8604 ―
MX 1bin, 2bin, 3bin, or 4bin stack
sensor or machine stack sensor
8701
detected the ejected paper full state at
the start of printing.
Machine stack sensor detected the
eject paper full state at the start of
8702
printing when the machine output tray
was selected as the output tray.
8703 ―
MX 1bin stack sensor detected the
eject paper full state at the start of
8708
printing when the MX 1bin was
selected as the output tray.
MX 2bin stack sensor detected the
eject paper full state at the start of
8709
printing when the MX 2bin was
selected as the output tray.
MX 3bin stack sensor detected the
eject paper full state at the start of
870A
printing when the MX 3bin was
selected as the output tray.
MX 4bin stack sensor detected the
eject paper full state at the start of
870B
printing when the MX 4bin was
selected as the output tray.
Machine stack sensor or MX 1bin
stack sensor detected the eject paper
full state at the start of printing when
870C
the MX 1bin was selected as the
output tray and "Use Std. Tray when
full" setting was ON.
Machine stack sensor or MX 2bin
stack sensor detected the eject paper
full state at the start of printing when
870D
the MX 2bin was selected as the
output tray and "Use Std. Tray when
full" setting was ON.
Machine stack sensor or MX 3bin
stack sensor detected the eject paper
full state at the start of printing when
870E
the MX 3bin was selected as the
output tray and "Use Std. Tray when
full" setting was ON.
Machine stack sensor or MX 4bin
stack sensor detected the eject paper
full state at the start of printing when
870F
the MX 4bin was selected as the
output tray and "Use Std. Tray when
full" setting was ON.
Refer Error
to: codes
8801 ―
8802 ―
MX back cover sensor detected the
open cover when the MX was
8808
selected as the output tray (before
registering printing data to engine).
MX back cover sensor detected the
open cover when the MX was
8809
selected as the output tray (after
registering printing data to engine).
2-72 880A ―
2-73 8901 ―
8902 ―
The back cover/duplex tray sensor
detected that the cover was open
2-73 8903 when duplex printing is started.
(Before registering printing data to
engine)
The back cover/duplex tray sensor
detected that the cover was open
2-73 8904
during duplex printing. (After
registering printing data to engine)
The registration rear sensor detected
that the paper fed was smaller or
2-73 8A01
larger than the specified size in duplex
printing mode.
2-73 8A02 ―
Detected that the TT was not turned
2-74 8B01
ON.
2-74 8C00 ―
2-74 8D01 ―
2-74 8D02 ―
2-16
Description
Confidential
Refer
to:
2-74
2-74
2-75
2-75
2-75
2-76