9.15 Low-voltage power supply PCB ASSY
(1) Remove the taptite cup S M3x8 SR screw and screw cup M3x8 (black) screw to remove
the scanner ground plate.
(2) Remove the three screw cup M3x8 screws, taptite bind B M4x12 screw, screw pan M4x8
screw, washer spring 2-4, and washer 5 to remove the LV shield plate cover.
(3) Remove the LVPS insulation sheet.
Taptite cup S M3x8 SR
Screw cup M3x8 (black)
Screw cup M3x8
(black)
Scanner ground plate
Washer spring 2-4
Washer 5
Screw pan M4x8
LV shield plate cover
Taptite bind B M4x12
Fig. 3-58
3-70
LVPS insulation sheet
Confidential