Brother HL-L5000D Service Manual page 249

(2) Disconnect the securing fixtures of the MP paper empty sensor harness from the paper
feed frame ASSY.
(3) Remove the two taptite bind B M3x10 screws. Release the two hooks, and remove the
MP feed frame from the paper feed frame ASSY. Then pull out the MP paper empty
sensor harness from hole of the paper feed frame ASSY.
(4) Remove the MP lift arm spring from the paper feed frame ASSY.
MP paper empty sensor
harness
Hole
Paper feed frame ASSY
Harness routing: Refer to
Taptite bind B M3x10
MP feed frame
Hook
Fig. 3-94
"8. Bottom side of the machine (High-voltage power supply PCB
3-104
Hook
MP lift arm spring
ASSY)".
Confidential