Brother HL-L5000D Service Manual page 66

Error message
First line
Size Error Specify the correct
paper size for Tray4.
Specify the correct
paper size for Tray5.
Size Error Specify the correct
2-sided paper and press
[Retry].
Specify the correct
paper.
Size Mismatch Reload correct paper
in MP Tray, then press
[Retry].
Reload correct paper
in Tray1, then press
[Retry].
Reload correct paper
in Tray2, then press
[Retry].
Reload correct paper
in Tray3, then press
[Retry].
Reload correct paper
in Tray4, then press
[Retry].
Reload correct paper
in Tray5, then press
[Retry].
Second line
When printing from paper tray 4, a
paper size not supported for paper
tray 4 was specified from the
driver.
When printing from paper tray 5, a
paper size not supported for paper
tray 5 was specified from the
driver.
A tray set to duplex printing-
incompatible size was specified in
duplex printing.
The registration rear sensor
detected that the paper fed was
smaller or larger than the specified
size in duplex printing mode.
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
When printing from the paper tray 1,
the size of paper set in the paper
tray 1 does not match the size
specified by the driver.
When printing from the paper tray 2,
the size of paper set in the paper
tray 2 does not match the size
specified by the driver.
When printing from the paper tray 3,
the size of paper set in the paper
tray 3 does not match the size
specified by the driver.
When printing from the paper tray 4,
the size of paper set in the paper
tray 4 does not match the size
specified by the driver.
When printing from the paper tray 5,
the size of paper set in the paper
tray 5 does not match the size
specified by the driver.
2-40
Description
Error Refer
codes to:
9705 2-80
9706 2-80
9701 2-80
8A01 2-75
9001 2-76
9002 2-76
9003 2-76
9004 2-76
9005 2-76
9006 2-76
Confidential