Resetting To Factory Shipping State - Brother HL-L5000D Service Manual

1.8 Resetting to Factory Shipping State

<Operating Procedure>
(1) Check that the machine is in the initial state of maintenance mode.
(2) Connect the computer to the machine with the USB cable.
(3) Check that the "Brother Maintenance USB Printer" is set as a default printer. If not, set it
as a default printer.
(4) Double-click the ShippingTool.exe file. The machine is reset to a factory shipping state.
(5) Unplug the AC power cord of the machine.
Memo:
• Be sure to perform the procedure. Otherwise security level (e.g., against information
leakage risk) would be low.
4-8
Confidential