T2Tt Unit - Brother HL-L5000D Service Manual

12.9 T2TT unit

(1) Remove the taptite bind B M4x10 screw to remove the air duct. Pull out the two
harnesses through the air duct hole.
(2) Remove the screw pan (S/P washer) M3.5x6 screw and screw cup M3x8 (black) screw
to remove the TT ground plate right.
(3) Remove the two screw cup M3x8 (black) screws to remove the TT ground plate rear.
Screw cup M3x8 (black)
Air duct
Taptite bind B
M4x10
Screw pan (S/P washer)
M3.5x6
TT ground plate rear
Hole
Screw cup M3x8 (black)
TT ground plate right
Hole
Fig. 3-160
3-164
Confidential