List Of Maintenance Mode Functions - Brother HL-L5000D Service Manual

1.2 List of Maintenance Mode Functions

Function
code
01
09
10
11
12
13
25
28
32
33
45
46
61
67
69
70
71
74
77
78
80
82
88
91
99
* The maintenance mode functions shaded in the table can be used by end users.
Initialize EEPROM parameters
Print quality test pattern
Set worker switches (WSW)
Print worker switch (WSW) setting data
Check LCD operation
Check control panel key operation
Display software version
Change setting for OnePushDemo function
Check sensor operation
Display LAN connection status
Change USB No. return value / Adjust left-end print
position / Adjust upper-end print position / Set HEXDUMP
mode
Adjust printable range for each speed level
(Full speed / Half speed for thick paper / Quiet Mode)
Adjust touch panel
Continuous print test
Print frame pattern (single-side printing)
Print frame pattern (duplex printing)
Print test pattern
Configure for country/region and model
Print maintenance information
Check main fan operation
Display machine log information
Display machine error code
Reset counters for consumable parts
Initialize EEPROM parameters
Quit maintenance mode
Function
5-4
Refer to:
1.3.1
1.3.2
1.3.3
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
1.3.9
1.3.10
1.3.11
1.3.12
1.3.13
1.3.14
1.3.15
1.3.16
1.3.17
1.3.18
1.3.19
1.3.20
1.3.21
1.3.22
1.3.1
1.3.23
Confidential