Ink Sensor Pcb Assy - Brother GT-3 Series Service Manual

6-2-19. Ink Sensor PCB Assy

Disassembling
1.
Remove the AC Cord and remove the six Screws (2) that fix the Cover Cartridge (1).
(2)
2.
Remove the Cover Cartridge (1).
3.
Disconnect the Harness: Ink Sensor (5) from the Connector (4) on the Ink Sensor PCB Assy (3).
Remove the one Screw (6) that fixes the PCB.
4.
Remove the Ink Sensor PCB Assy (3).
5.
Follow the reverse steps in reassembling.
(2)
(1)
(4)
(6)
GT-3 Series
(2)
(5)
(3)
6. Replacing Parts
339