Brother HL-L5000D Service Manual page 200

(4) Remove the four taptite cup B M3x10 screws. Remove the panel cover case lower from
the top cover printed ASSY. Pull out the FG harness and two flat cables from the hole.
(5) Release the hook, and remove the panel ground spring. Remove the panel spring from
the panel ground spring.
Panel cover case lower
Panel ground spring
Panel spring
Assembling Note:
• Attach the panel ground spring and panel spring as described in the figure above.
Hook
Panel ground spring
Fig. 3-41
3-55
Taptite cup B M3x10
Top cover printed ASSY
Confidential