Reset Counters For Consumable Parts (Function Code: 88) - Brother HL-L5000D Service Manual

1.3.22 Reset counters for consumable parts (function code: 88)

<Function>
This function is performed to reset the counter for each consumable part in the main PCB
after that has been replaced.
<Operating Procedure>
Non touch panel models
(1) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 88" on the LCD, and
press the [OK] key. "Reset-Laser Unit"
is displayed on the LCD.
(2) Press the [▲] or [▼] key to display the
part with the counter to be reset on
the LCD, and press the [OK] key.
(3) "*******OK?" is displayed on the LCD.
Press the [OK] key to reset the
counter for the selected part and
return the display to the procedure (2).
(******* represents the name of the
selected part)
(4) Press the [X] key, and the machine
returns to the initial state of
maintenance mode.
Selectable parts are shown in the table below.
LCD
Reset-Laser Unit
Reset-Fuser Unit
Reset-PF Kit T1
Reset-PF Kit T2
Reset-PF Kit T3
Reset-PF Kit T4
Reset-PF Kit T5
Reset-PF Kit MP
Reset-LVPS
Part name
Laser unit
Fuser unit
PF kit 1
PF kit 2
PF kit 3
PF kit 4
PF kit 5
PF kit MP
Low-voltage power supply
PCB ASSY
5-49
Touch panel models
(1) Press the [8] key twice in the initial
state of maintenance mode. "Reset-
Laser Unit" is displayed on the LCD.
(2) Press the [˄] or [˅] key to display the
part with the counter to be reset on
the LCD, and press the [Mono] key.
(3) "*******OK?" is displayed on the LCD.
Press the [Mono] key to reset the
counter for the selected part and
return the display to the procedure (2).
(******* represents the name of the
selected part)
(4) Press the [X] key, and the machine
returns to the initial state of
maintenance mode.
Counter to be reset
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Irregular power supply detection counter
Confidential