T3Tt Unit - Brother HL-L5000D Service Manual
Hide thumbs
Also See for HL-L5000D:
- User manual (384 pages) ,
- Reference manual (19 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
12.10 T3TT unit
(1) Remove the two taptite cup S M3x8 SR screws to remove the positioning plate calking
ASSY. (Four places)
(2) Remove the six taptite cup S M3x8 SR screws to remove the reinforcing plate L (1/2).
(3) Remove the four taptite cup S M3x8 SR screws to remove the FG plate L.
(4) Remove the four taptite bind B M4x12 screws to remove the calking gear plate ASSY.
(5) Remove the three taptite cup S M3x8 SR screws and the two taptite bind B M4x10
screws. Lift the T3TT unit slightly, and pull the T4TT relay harness and T5TT relay
harness from the T3TT unit hole to remove the T3TT unit in the direction of the arrow.
T4TT relay harness
Positioning plate
calking ASSY
Positioning plate
calking ASSY
Taptite cup S
Taptite cup
M3x8 SR
S M3x8 SR
Taptite cup S
M3x8 SR
Taptite cup S
M3x8 SR
Positioning plate calking ASSY
Harness routing: Refer to
T3TT unit
Taptite bind B
M4x10
Taptite cup S M3x8 SR
Fig. 3-162
"13. Left side of the
TT".
3-166
Hole
T5TT relay harness
Positioning plate calking ASSY
Taptite cup S M3x8 SR
FG plate L
Taptite bind B M4x10
Taptite cup S
M3x8 SR
Taptite cup S M3x8 SR
Reinforcing plate L (1/2)
Taptite cup S M3x8 SR
Calking gear
plate ASSY
Taptite bind B M4x12
Confidential
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
