Lt/Tt Connector Assy (T2Tt Only) - Brother HL-L5000D Service Manual

12.14 LT/TT connector ASSY (T2TT only)

(1) Release the LT/TT connector harness from the securing fixtures.
(2) Release the hook A to remove the ferrite core.
(3) Release the two hooks B, and slide the LT/TT connector ASSY in the direction of the
arrow to remove it. Pull out the LT/TT connector harness through the frame L hole.
LT/TT connector harness
Harness routing: Refer to
LT/TT connector ASSY
Hooks B
Ferrite core
Fig. 3-170
"13. Left side of the TT".
3-173
Hole
Frame L
Hook A
Confidential