Mp Tray Assy/Mp Paper Detection Sensor Pcb/< India Model Only > Mp Dust Foam - Brother HL-J6000DW Service Manual

9.5 MP Tray ASSY/MP Paper Detection Sensor PCB/
< India model only > MP Dust Foam
(1) Remove the MP drive shaft from the MP drive gear holder 3.
Note: Be careful not to lose the MP drive gear which easily comes off from the MP
drive gear holder 3.
Assembling Note: When mounting the MP drive shaft, insert it into the MP drive gear
MP drive gear holder 3
MP drive gear
(2) Remove the two screws (TAPTITE CUP B M4x12).
(3) Release the two Pins and remove the MP tray ASSY from the Main body.
Note: A harness is connected to the MP tray ASSY from the Main body, and therefore
be careful not to pull the MP tray ASSY too much when you remove it.
and MP drive gear holder 3.
Fig. 3-25
Pin
Main body
Fig. 3-26
3-47
MP drive shaft
Pin
MP tray ASSY
TAPTITE CUP
B M4x12
Confidential