Inlet Cap Removal; Figure 11-6. Fiberglass Sleeve; Figure 11-7. Air Inlet Cover Removal; Figure 11-8. Filter Screen & 9V Removal - Saros 9400R-SEQ Operators & Service Manual

Operator & Service Manual
11.7.1.5 Remove Fiberglass Sleeve (Part# 9280-SEQ) from the
Sleeve: 9280-SEQ
rails

Figure 11-6. Fiberglass Sleeve

11.7.2 INLET CAP REMOVAL

NOTE: Use ESD Controls when removing the Inlet Cap.
11.7.2.1 Loosen the four CAPTIVE screws (Part# 9291-SEQ)
and remove the Air Inlet Cover (Part# 9758).
Captive
Screws

Figure 11-7. Air Inlet Cover Removal

11.7.2.2 Remove and disconnect the 9V Battery (Part# 9257-
SEQ) and the Air Inlet Filter (Part# 9798-SEQ).
Filter
9V battery
Figure 11-8. Filter Screen & 9V Removal
11.7.2.3 Remove three Inlet Cap Mounting screws (Part# 9914-
6-SEQ).
inlet cap
mounting Screws
(NOT CAPTIVE)
Part# 9914-6-SEQ

Figure 11-9. Inlet Cap Screw Removal

50 | 9735-SEQ H