Table 5-3. Pulse Settings - Saros 9400R-SEQ Operators & Service Manual

autoSAT Technology provides a consistent bolus volume of oxygen as a patients' breath rate increases or decreases.
NOTE: Bolus volume decreases as breath rate exceeds published range.
The Pulse Flow Sensitivity (P SENS) can be adjusted in the Utility Menu from 1–3. A setting of 1 is the most sensitive and a set-
ting of 3 is the least.
WARNING: PULSE FLOW MODE SETTINGS MUST BE DETERMINED FOR EACH PATIENT INDIVIDUALLY. SETTINGS
USED IN THE CONTINUOUS FLOW MODE MAY NOT APPLY, OR BE APPROPRIATE, IN THE PULSE FLOW MODE AND
VICE VERSA.
WARNING: AS WITH ALL OXYGEN-CONSERVING TYPE DEVICES, THE SAROS MAY NOT BE ABLE TO DETECT ALL INSPI-
RATORY EFFORTS IN THE PULSE FLOW MODE.
Step 5: ADJUST THE FLOW SETTING TO THE PRESCRIBED LEVEL
Using the Flow Setting Buttons, adjust the flow setting to the prescribed setting.
NOTE: When any Control Panel settings are changed, the SAROS re-enters a 5 minute stabilization mode during which no alarms are to
be expected.
Step 6: SELECT USER DEFINABLE SETTINGS USING THE UTILITY MENU
The Utility Menu has the features that can be adjusted by the user or information for the user or Service Technician. Below are the
features of the Utility Button and the Utility Menu:
• Pressing the Utility button will turn off the audio alarm for 119 seconds unless this is prevented by a malfunction.
• The Utility Menu mode can be entered whenever the unit has power (Standby or ON) or 9V Battery.
• Each time the Utility Button is pressed, the Utility menu will advance to the next option.
• The options within the Utility Menu can be changed by using the Increase and Decrease buttons.
• Pressing the Flow Mode button in the Utility Menu goes back to the previous Utility menu item.
• The Utility Menu will revert back to the previous display mode after 5 seconds.
30 | 9735-SEQ H
Pulse Setting
Bolus Size (+/- 15%)
16
32
48
64
80
96

Table 5-3. Pulse Settings

Maximum Breath Per Minute
(bpm)
40
40
40
40
37
31
Operator & Service Manual