Saros 9400R-SEQ Operators & Service Manual page 3

Operator & Service Manual
Audible Alarm*; An audible indicator is
provided to announce an audible alarm for
the following: low purity after warm up,
flow rate out of range, warm battery, battery
communication lost, and low battery.
Alert (Yellow) Indicator*: When illuminated,
this indicates an awareness condition or
Caution.
Alarm (Red) Indicator*: In Normal
Mode, when illuminated, this indicates a
Malfunction and the SAROS will stop
operating. An immediate response is
necessary and contact a Service Technician.
ON/OFF (Standby); Powers the device ON
or OFF, but does not directly disconnect the
main power.
Increase Flow Setting; Increases the flow
setting by 1.0 LPM increments or by 1 pulse
setting each time the button is pressed.
Decrease Flow Setting; Decreases the flow
setting by 1.0 LPM increments or by 1 pulse
setting each time the button is pressed.
Activates either Continuous Flow Mode or
Pulse Flow Mode Operation.
Utility; The Button that activates a utility
menu to access information or to change
settings.
External Power is Present Indicator; Indicates
the presence of external power.
Battery Status Indicator; Shows the amount
of charge remaining in the battery. When
charging, battery displays as a "Waterfall"
Effect.
21 CFR 801.15: CODE OF FEDERAL REGULATIONS
TITLE 21
Federal law restricts this device to sale by or
on the order of a physician.
COUNCIL DIRECTIVE 2012/19/EU: WASTE ELECTRICAL
AND ELECTRONIC EQUIPMENT (WEEE)
WEEE
IEC 60601-1: MEDICAL ELECTRICAL EQUIPMENT - PART
1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND
ESSENTIAL PERFORMANCE
Classification; Class II Equipment, double
insulated.
Safety; Safety agency for CAN/CSA C22.2
No. 60601-1-08 M90 for medical electrical
equipment
*Alarms for the SAROS are considered information only
signals.
This product may be covered by one or more patents, US and
international. Please visit our website below for the listing of
applicable patents. Pat.: patents.gtls.io.
9735-SEQ H | 3