Removal Procedures; Battery Interface Plate, Rain Guard, And Sleeve; Figure 11-2. Removal Of The Three Bip Screws; Figure 11-3. Removal Of The Three Rain Guard Screws - Saros 9400R-SEQ Operators & Service Manual

Operator & Service Manual
11.7.1.1 Remove the three screws (Part# 9914-6-SEQ) and re-
move the Battery Interface Plate (Part# 9939-SEQ).
11.7.1.2 Removing the two screws (Part# 9960-4-SEQ) from the
Rain Guard (Part# 9292-SEQ)
11.7.1.3 Detach the Rain Guard (Part# 9292-SEQ) from the
Alignment Ring
11.7.1.4 Remove the Ring SLEEVE (Part# 9928-SEQ) to expose
wiring.
NOTE: Ensure both O-Rings (Part # 9374-SEQ) remains with the
Ring Sleeve.

11.7 REMOVAL PROCEDURES

11.7.1 BATTERY INTERFACE PLATE, RAIN GUARD, AND SLEEVE

Part# 9914-6-SEQ
Screws

Figure 11-2. Removal of the three BIP screws

Figure 11-3. Removal of the three Rain Guard Screws

Figure 11-4. Removal of the Rain Guard

Figure 11-5. Removal of Sleeve Alignment Ring

Battery Interface
Plate Part # 9939-
SEQ
Screws
Part#
9960-4-SEQ
Rain Guard
Part# 9292-SEQ
Rain Guard
Part# 9292-SEQ
9374-SEQ 9928-SEQ
9735-SEQ H | 49