Definition Of Symbols Page / Warning Page - Saros 9400R-SEQ Operators & Service Manual

WARNING: DO NOT OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING THIS MANUAL. IF
YOU ARE UNABLE TO UNDERSTAND THE WARNINGS AND INSTRUCTIONS, CONTACT YOUR EQUIPMENT PROVIDER
BEFORE ATTEMPTING TO USE THIS EQUIPMENT; OTHERWISE, INJURY OR DAMAGE MAY RESULT.
WARNING: INDICATES A HAZARDOUS SITUATION THAT, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS
INJURY.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTE: Indicates information considered important, but not hazard-related (e.g. messages relating to property damage).
Symbols are frequently used on equipment in preference to words with the intention of reducing any possibility of misunderstand-
ing caused by language differences. Symbols can also permit easier comprehension of a concept within a restricted space.
ISO 7000; GRAPHICAL SYMBOLS FOR USE ON
EQUIPMENT—INDEX AND SYNOPSIS
Portable operating temperature is -10C to 40C.
Base operating temperature range is 10C-40C.
Reg. # 0632
Portable humidity range is 15 to 95%. Base
humidity range is 30 to 75%. Reg. #2620
Keep away from rain, keep dry. Reg. # 0626
Name and address of manufacturer. Reg. #
3082
Date of Manufacture. Reg. #2497
Caution, consult accompanying documents.
Reg. # 0434A
Catalog Number. Reg. # 2493
Serial Number. Reg. # 2498
This way up. Reg. # 0623
Fragile, handle with care. Reg. # 0621
Stacking height. Reg #2473
2 | 9735-SEQ H

DEFINITION OF SYMBOLS PAGE / WARNING PAGE

SYMBOLS USED IN THE OPERATION OF SAROS
ISO 7010: GRAPHICAL SYMBOLS—SAFETY COLORS
AND SAFETY SIGNS—REGISTERED SAFETY SIGNS
Keep away from open flame, fire, sparks.
Open ignition source and smoking prohibited.
Reg. # P003
Do not smoke near unit or while operating
unit. Reg. # P002
Type BF applied part (degree of protection
against electric shock). Reg. # 5333
Warning. Reg. # W001
The instruction manual must be read. Reg. #
M002
INTERNAL SYMBOLS
Keep away from flammable materials, oil and
grease.
Oxygen Output; The port from which the
O Oxygen flows and where the tubing or
2
interface(standard nasal cannula) is connected.
IEC Icon for DC Power (Input) Indicates
equipment providing a particular degree of
protection against electric shock, particularly
regarding: Allowable leakage current; Reli-
ability of a proper ground connection.
Amperes (Current)
Alternating Current (AC)
Operator & Service Manual