11.7.3.12 Slide the PCB Assembly away from the struts. (Place
in ESD bag.)
NOTE: Always use ESD Control when handling the PCB Assembly.
11.7.3.13
Place PCB Set in ESD Protective Bag.
11.7.4.1 Remove Proportional Valve wire from PCB Assembly
(if not done so already).
11.7.4.2 Remove the two screws from the Proportional valve.
NOTE: If Removing the Compressor Fan go to Step 12.9
11.7.4.3 Cut and remove Cable Tie from Proportional valve and
remove tubing.
11.7.4.4 Remove the Proportional Valve (5293-SEQ) from the
Proportional Valve Block and replace.
54 | 9735-SEQ H
11.7.4 PROPORTIONAL VALVE REMOVAL (5293-SEQ)
proportional
valve connector
Operator & Service Manual
F
igure 11-20. PCB Assembly
F
igure 11-21. Proportional Valve Wire
F
igure 11-22. Proportional Valve Tube
F
igure 11-23. Replace Proportional Valve