Introduction; General Information - Saros 9400R-SEQ Operators & Service Manual

Operator & Service Manual

1.0 INTRODUCTION

1.1 GENERAL INFORMATION

This manual will familiarize you with information regarding the SAROS Oxygen System, Model 3000.
INTRODUCTION
The SAROS Oxygen System, Model 3000 with autoSAT Technology (hereafter referred to as SAROS) is a portable medical
®
device used to extract oxygen from the atmosphere, concentrate it to greater than 90% and flow it through the oxygen outlet port.
The device will operate in Continuous flow or Pulse flow modes. In Continuous Flow Mode the oxygen is provided at a constant
flow rate of 1, 2, or 3 LPM. In Pulse flow Mode, oxygen is supplied in a bolus at the beginning of each inspiration, providing a
selectable range setting of flow between 16 ml and 96 ml, in increments of 16 ml.
SAROS is BTP (Body, Temperature, and Pressure) compensated. It delivers oxygen by accounting for difference between ambient
conditions and those found in the patient's lungs (37°C).
SAROS operates from external AC power, 24VDC or from a rechargeable Battery. The system includes a "Smart Battery" charger
that recharges the Battery whenever the SAROS is connected to external power. The system monitors and controls both the power
source and the Battery Charger.
SAROS has a five minute warm up/stabilization period during which no alerts or codes are to be expected.
WARRANTY
SAROS: 1 year or 1,000 hours, whichever comes first.
Battery: 1 year.
Power Supplies: 1 year.
9735-SEQ H | 11