Transmitter - ABB ProcessMaster FEM630 Operating Instructions Manual

8
F EM63 0 | E L EC TR OM AG N E T I C FLOWM E T E R | O I/F E M6 3 0-EN RE V. A
2 . . .Design and function

Transmitter

1 Single-compartment transmitter housing
Figure 2 Designs
Transmitter
Model
Housing
IP rating
Cable length
Power supply
Outputs
Additional outputs
Communication
Approvals
Explosion protection
Additional approvals
2
2 Dual-compartment transmitter housing
FET632
Integral mount design, remote mount design
IP 65 / IP 67 / NEMA 4X
Maximum 164 ft (50m) remote mount design only
100 to 240 V AC (−15 / +10 %) 50 / 60 Hz, 16.8 to 30 V DC
Current output: 4 to 20 mA active or passive (can be configured on-site)
Digital output 1: passive, configurable as pulse, frequency or switch output
Digital output 2: passive, configurable as pulse or switch output
The transmitter has two slots which can be used to insert plug-in cards to extend the outputs.
The following plug-in cards are available:
• Current output (passive)
• Digital output (passive)
• Digital input (passive):
• 24 V DC power supply for active outputs
• Modbus®
Standard: HART® 7.1
Option: PROFIBUS DP®/ Modbus®
FM / cFM Cl I Div 1, Cl II Div 2
At www.abb.com/flow or on request.
1