Installing The Transmitter In The Remote Mount De; Sign - ABB ProcessMaster FEM630 Operating Instructions Manual

FE M63 0 | E L EC TR OM AG N E T I C FLOWM E T E R | O I/F E M6 3 0-EN RE V. A
5 . . .Installation
Installing the transmitter in the remote
mount design
When selecting a location for the transmitter, consider the
following points:
• Observe the information concerning maximum ambient
temperature and IP rating on the name plate
• The location must be mostly free from vibration.
• The location must not be exposed to direct sunlight. If
necessary provide a sun screen on site.
• Do not up-scale the maximum signal cable length
between the transmitter and the sensor.
1
Drill mounting holes at mounting location.
2
Attach transmitter securely to the mounting location
using suited fasteners for the base material.
205 (8.07)
Ø 7 (0.28)
1
1
Hole pattern for mounting holes
Figure 19 Mounting dimensions dual-compartment housing
71 (2.8)
G11567
1
Hole pattern for mounting holes
Figure 20 Mounting dimensions single-compartment housing
21