FE M63 0 | E L EC TR OM AG N E T I C FLOWM E T E R | O I/F E M6 3 0-EN RE V. A
9
. . .Diagnosis / error messages
Extended diagnostic functions
Overview
Note
• The extended diagnostic functions are only available on
the ProcessMaster FEM630 if the 'Extended diagnostic
functions' software package has been ordered (see table) .
• To facilitate initial commissioning, the individual diagnosis
options of the extended diagnostic functions are deacti-
vated (factory default).
• Each diagnostic function (e.g. Gas Bubble Detector or
Electrode Deposit Detector) can be individually activated.
Once activated, the diagnostic function must be calibrated
according to the conditions on site and the limit values
must be set.
Diagnostic Functions
Standard
Software package 'Extended
diagnostic functions' (optional)
Filling function (optional)
Empty pipe detection (EPD)
Noise / grounding check
Fingerprint verification
Service interval
Transmitter temperature
Coil/sensor temperature
Coil inductance
Gas bubble detection
Conductivity monitoring
Electrode impedance / Leakage
Monitoring
Filling function
117