Recycling And Disposal; Dismounting; Disposal - ABB ProcessMaster FEM630 Operating Instructions Manual

FE M63 0 | E L EC TR OM AG N E T I C FLOWM E T E R | O I/F E M6 3 0-EN RE V. A
12

Recycling and disposal

Dismounting

WARNING
Risk of injury due to process conditions .
The process conditions, for example high pressures and
temperatures, toxic and aggressive measuring media,
can give rise to hazards when dismantling the device.
• If necessary, wear suited personal protective
equipment during disassembly.
• Before disassembly, make sure that the process
conditions do not pose any safety risks.
• Depressurize and empty the device / piping, allow to
cool and purge if necessary.
Bear the following points in mind when dismantling the
device:
• Switch off the power supply.
• Disconnect electrical connections.
• Allow the device / piping to cool and depressurize and
empty. Collect any escaping medium and dispose of it in
accordance with environmental guidelines.
• Use suited tools to disassemble the device, taking the
weight of the device into consideration.
• If the device is to be used at another location, the device
should preferably be packaged in its original packing so
that it cannot be damaged.
• Observe the notices in Returning devices on page 128.

Disposal

Note
Products that are marked with the adjacent symbol
may not be disposed of as unsorted municipal
waste (domestic waste).
They should be disposed of through separate
collection of electric and electronic devices.
This product and its packaging are manufactured from
materials that can be recycled by specialist recycling
companies.
Bear the following points in mind when disposing of them:
• As of 8/15/2018, this product will be under the open scope
of the WEEE Directive 2012/19/EU and relevant national
laws (for example, ElektroG - Electrical Equipment Act - in
Germany).
• The product must be supplied to a specialist recycling
company. Do not use municipal waste collection points.
These may be used for privately used products only in
accordance with WEEE Directive 2012/19/EU.
• If there is no possibility to dispose of the old equipment
properly, our Service can take care of its pick-up and
disposal for a fee.
129