Selecting And Changing Parameter; Entry From Table - ABB ProcessMaster FEM630 Operating Instructions Manual

FE M63 0 | E L EC TR OM AG N E T I C FLOWM E T E R | O I/F E M6 3 0-EN RE V. A
8 . . .Operation

Selecting and changing parameter

Entry from table

When an entry is made from a table, a value is selected from a
list of parameter values.
Menu Name
Parameter name
Currently set value
Next
1 Select the parameters you want to set in the menu.
2 Use to call up the list of available parameter values.
The parameter value that is currently set is highlighted.
Parameter name
Parameter 1
Parameter 2
Parameter 3
Cancel
3 Select the desired value using
4 Confirm the selection with
This concludes the procedure for selecting a parameter value.
Numerical entry
When a numerical entry is made, a value is set by entering the
individual decimal positions.
Menu name
Parameter name
12 .3456 [unit]
Next
1
Select the parameters you want to set in the menu.
2
Use to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Edit
OK
/ .
.
Edit
Parameter name
12.3456 [unit]
Next
3 Use to select the decimal place to change.
4 Use / to set the desired value.
5 Use to select the next decimal place.
6 If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7
Use to confirm your setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by
entering the individual decimal positions.
Menu name
Parameter name
Currently set value
Next
1 Select the parameters you want to set in the menu.
2 Use to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
ABC.........
ABCDEFGHIJKLMOPQ
Next
3 Use to select the decimal place to change.
4 Use / to set the desired value.
5 Use to select the next decimal place.
6 If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7
Use to confirm your setting.
This concludes the procedure for changing a parameter value.
65
OK
Edit
OK