Do Not Disturb - NEC Univerge SV8100 General Description Manual

UNIVERGE SV8100
Directory Dialing
Enhancements
Directory Dialing with main CPU software Version 3000 or higher provides the
following enhancements:


Directory Dialing allows a multiline terminal user to select a co-worker or outside
caller from a list of names, rather than dialing the telephone number. There are four
types of Directory Dialing:




Distinctive Ringing, Tones and Flash Patterns
Distinctive Ringing, Tones and Flash Patterns provide extension users with audible
and visual call status signals. This lets users tell the type of call by listening to the
ringing/tones and watching the keys. It also helps users monitor the progress of their
calls. In addition, Distinctive Ringing lets multiline terminal users customize their
Intercom and trunk call ringing. This is helpful for users that work together closely.
For example, if several co-workers set their multiline terminals to ring at different
pitches, each co-worker can always tell which calls are for them. You can also
customize the tones the system uses for splash tone, confirmation tone, trunk ring
tone, Intercom ring tone and Alarm ring tone. Refer to the UNIVERGE SV8100
Programming Manual for more details.

Do Not Disturb

Do Not Disturb blocks incoming calls and Paging announcements. DND permits an
extension user to work by the telephone undisturbed by incoming calls and
announcements. The user can activate DND while their telephone is idle or while on
a call. Once activated, incoming trunk calls still flash the line keys. The user may use
the telephone in the normal manner for placing and processing calls.
General Description Manual
Pressing the Right Cursor Key twice (on equipped terminals) displays the Common/
Group Speed Dial directory.
Pressing the Right Cursor Key three times (on equipped terminals) displays the
Extension Name directory.
SPD – Speed Dials
EXT – Co-worker's Extensions
STA – Personal Speed Dials
TELBK – Telephone Book
Issue 5.02
2 - 27