Show Running-Config Bgp - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show running-config bgp

To display the running configuration for the Border Gateway Protocol (BGP) for IPv4 networks, use the
show running-config bgp command.
Syntax Description all
Command Default
None
Command Modes
EXEC mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples
This example shows how to display the running configuration for BGP:
switch# show running-config bgp
!Command: show running-config bgp
!Time: Sat May 29 05:07:52 2010
version 5.0(3)A1(1)
feature bgp
router bgp 201
router-id 192.168.0.14
address-family ipv4 unicast
neighbor 192.168.0.201 remote-as 201
switch#
This example shows how to display the complete running configuration for BGP:
switch# show running-config bgp all
!Command: show running-config bgp all
!Time: Sat May 29 05:12:07 2010
OL-27852-01
show running-config bgp [all]
(Optional) Displays the full operating information including default
settings.
Modification
This command was introduced.
network 192.0.0.0/2
description Peer Router B
timers 30 90
address-family ipv4 unicast
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show running-config bgp
519