Restart Rip - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

restart rip

To restart a Routing Information Protocol (RIP) instance and remove all associated neighbors, use the
restart rip command.
Syntax Description instance-tag
Command Default
None
Command Modes
Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to restart the RIP instance and remove all neighbors:
switch# configure terminal
switch(config)# restart rip Enterprise
switch(config)#
Related Commands Command
copy running-config
startup-config
show ip eigrp
interfaces
OL-27852-01
restart rip instance-tag
Modification
This command was introduced.
Description
Saves the configuration in the startup configuration file.
Displays information about EIGRP interfaces.
Name for an RIP routing instance. The name can be a maximum of
20 alphanumeric characters.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
restart rip
309