Routing-Context Vrf - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

routing-context vrf

To set the virtual routing and forwarding (VRF) scope for all EXEC commands, use the routing-context
vrf command. To return to the default setting, use the no form of this command.
Syntax Description
vrf-name
Command Default default VRF
Command Modes EXEC mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This feature automatically restricts the scope of the output of EXEC commands to the configured VRF.
You can override this scope by using the VRF keywords available for some EXEC commands.
This command does not require a license.
Examples This example shows how to limit EXEC commands to the management VRF:
switch# routing-context vrf management
switch%management#
Related Commands Command
show routing-context
OL-27852-01
routing-context vrf vrf-name
no routing-context vrf vrf-name
Name of the VRF instance. The name can be any case-sensitive,
alphanumeric string up to 32 characters.
The VRF name can be one of the following:
•
•
Modification
This command was introduced.
Description
Displays the current routing context.
default—Specifies the default VRF.
management—Specifies the management VRF.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
routing-context vrf
323