Router Eigrp - Cisco Nexus 3548 Command Reference Manual

router eigrp

router eigrp
To configure a routing process and enter router configuration mode for Enhanced Interior Gateway
Routing Protocol (EIGRP), use the router eigrp command. To turn off the EIGRP routing process, use
the no form of this command.
Syntax Description
instance-tag
Command Default
None
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples This example shows how to configure a routing process for EIGRP:
switch# configure terminal
switch(config)# router eigrp 1
switch(config-router)#
Related Commands Command
default-information
default-metric
distance
maximum-paths
redistribute
router-id
timers
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
318
router eigrp instance-tag
no router eigrp instance-tag
Name of an EIGRP instance. The instance-tag can be any case-sensitive,
alphanumeric string up to 20 characters.
Modification
This command was introduced.
Description
Controls the distribution of a default route.
Configures the default metric for routes redistributed into EIGRP.
Configures the administrative distance.
Configures the maximum number of equal-cost paths.
Configures route redistribution for EIGRP.
Configures the router ID.
Configures the EIGRP timers.
Chapter Unicast Routing Commands
OL-27852-01