Cisco Nexus 3548 Command Reference Manual page 348

set comm-list delete
switch# configure terminal
switch(config)# route-map test1
switch(config-route-map)# match as-path 1
switch(config-route-map)# set comm-list list1 delete
switch(config-route-map)#
Related Commands Command
match as-path
match community
match ip next-hop
match ip route-source
match metric
match tag
route-map (IP)
set as-path
set community
set level
set local-preference
set metric
set metric-type
set next-hop
set tag
set weight
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
328
Description
Matches a BGP autonomous system path access list.
Matches a BGP community.
Redistributes any routes that have a next-hop router address passed
by one of the access lists specified.
Redistributes routes that have been advertised by routers and access
servers at the address specified by the access lists.
Redistributes routes with the metric specified.
Redistributes routes in the routing table that match the specified
tags.
Defines the conditions for redistributing routes from one routing
protocol into another.
Modifies an autonomous system path for BGP routes.
Sets the BGP communities attribute.
Indicates where to import routes.
Specifies a preference value for the autonomous system path.
Sets the metric value for a routing protocol.
Sets the metric type for the destination routing protocol.
Specifies the address of the next hop.
Sets a tag value of the destination routing protocol.
Specifies the BGP weight for the routing table.
Chapter Unicast Routing Commands
OL-27852-01