Show Ip Ospf Border-Routers - Cisco Nexus 3548 Command Reference Manual

show ip ospf border-routers

show ip ospf border-routers
To display the Open Shortest Path First (OSPF) routing table entries to an Area Border Router (ABR)
and Autonomous System Boundary Router (ASBR), use the show ip ospf border-routers command.
Syntax Description instance-tag
vrf vrf-name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the show ip ospf border-routers command to display information on ABRs. and ASBRs.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display information about border routers:
switch# show ip ospf border-routers
Related Commands Command
show running-config
ospf
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
476
show ip ospf [instance-tag] border-routers [vrf vrf-name]
Modification
This command was introduced.
Description
Displays the OSPF running configuration.
(Optional) Name of the OSPF instance. Use this tag to display OSPF
information about a specific OSPF instance. The instance-tag
argument can be a maximum of 20 alphanumeric characters.
(Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The vrf-name argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters. The strings
"default" and "all" are reserved VRF names.
Chapter Unicast Routing Show Commands
OL-27852-01