Show Ip Bgp Community-List - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show ip bgp community-list

To display Border Gateway Protocol (BGP) routes that are permitted by the BGP community list, use the
show ip bgp community-list command.
Syntax Description ipv4
unicast
multicast
all
commlist-name
exact-match
vrf vrf-name
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples
This example shows how to display routes that match a community list:
switch(config)# show ip bgp community-list test1
Related Commands Command
ip community-list
OL-27852-01
show ip bgp [[ipv4 ]{unicast | multicast} | all] community-list commlist-name [exact-match]}
[vrf vrf-name]
(Optional) Displays BGP information for the IPv4 address family.
Displays BGP information for the unicast address family.
Displays BGP information for the multicast address family.
Displays BGP information for all address families.
Community list name that can be any case-sensitive, alphanumeric string up to 63
characters.
(Optional) Displays an exact match of the communities.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Creates a community list.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip bgp community-list
439