Feature Rip - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

feature rip

To enable the Routing Information Protocol (RIP), use the feature rip command. To disable RIP, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines You must enable the RIP feature before you can configure RIP.
This command does not require a license but if you want to enable Layer 3 interfaces, you must install
the LAN Base Services license.
Examples This example shows how to enable the RIP feature:
switch# configure terminal
switch(config)# feature rip
switch(config)#
This example shows how to disable the RIP feature:
switch# configure terminal
switch(config)# no feature rip
switch(config)#
Related Commands Command
show feature
show rip
router rip
OL-27852-01
feature rip
no feature rip
Modified
This command was introduced.
Description
Displays the status of features on a switch.
Displays RIP configuration information.
Creates a RIP instance.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
feature rip
129