Chapter
Unicast Routing Show Commands
show ip process
To display formation about the IP process, use the show ip process command.
Syntax Description
vrf vrf-name
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(3)A1(1)
Examples
This example shows details about the IP process:
switch(config)# show ip process
Related Commands
Command
show running-config
OL-27852-01
show ip process [vrf vrf-name]
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings "default" and "all" are
reserved VRF names.
Modification
This command was introduced.
Description
Displays the running configuration information.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip process
497