Cisco Nexus 3548 Command Reference Manual page 246

match as-path
Command
match ip next-hop
match route-type
match tag
route-map
set as-path
set comm-list
set community
set level
set local-preference
set metric (BGP,
OSPF, RIP)
set metric-type
set origin (BGP)
set tag
set weight
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
226
Description
Redistributes any routes that have a next-hop router address passed by one
of the access lists specified.
Redistributes routes of the specified type.
Redistributes routes in the routing table that match the specified tags.
Defines the conditions for redistributing routes from one routing protocol
into another.
Modifies an autonomous system path for BGP routes.
Automatically computes the tag value in a route map configuration.
Sets BGP community list (for deletion).
Indicates where to import routes.
Specifies a preference value for the autonomous system path.
Sets the metric value for a routing protocol.
Sets the metric type for the destination routing protocol.
Sets the BGP origin code.
Sets the value of the destination routing protocol.
Specifies the BGP weight for the routing table.
Chapter Unicast Routing Commands
OL-27852-01