Show Routing Hash - Cisco Nexus 3548 Command Reference Manual

show routing hash

show routing hash
To display the route selected for a particular source and destination address, use the show routing hash
command.
Syntax Description source-addr
dest-addr
source-port
dest-port
vrf vrf-name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to display the route selected to reach 192.168.0.2 from 192.168.0.5:
switch# show routing hash
Related Commands Command
clear ip route
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
514
show routing hash source-addr dest-addr [source-port dest-port]] [vrf vrf-name]
Source IPv4 address. IPv4 address format is x.x.x.x.
Destination IPv4 address. IPv4 address format is x.x.x.x.
(Optional) Source port. The range is from 1 to 65535.
(Optional) Destination port. The range is from 1 to 65535.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Clears entries in the route table.
192.168.0.5 192.168.0.2
Chapter Unicast Routing Show Commands
OL-27852-01