Show Ip Static-Route - Cisco Nexus 3548 Command Reference Manual

show ip static-route

show ip static-route
To display static routes from the unicast Routing Information Base (RIB), use the show ip static-route
command.
Syntax Description vrf vrf-name
all
Command Default
None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to display the static routes:
switch(config)# show ip static-route
Related Commands Command
ip route
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
506
show ip static-route [vrf {vrf-name | all}]
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
(Optional) Specifies all virtual router contexts (VRF) name.
Modification
This command was introduced.
Description
Configures a static route.
Chapter Unicast Routing Show Commands
OL-27852-01