Feature Hsrp; Hsrp Group - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

feature hsrp

To enter Hot Standby Router Protocol (HSRP) configuration mode and enable HSRP, use the feature
hsrp command. To disable HSRP, use the no form of this command.
Syntax Description
The command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines You must enable the HSRP feature before you can configure HSRP.
This command does not require a license.
Examples This example shows how to enable HSRP on the switch:
switch# configure terminal
switch(config)# feature hsrp
switch(config)#
This example shows how to disable HSRP:
switch# configure terminal
switch(config)# no feature hsrp
switch(config)#
Related Commands Command

hsrp group

show feature
show hsrp
OL-27852-01

feature hsrp

no feature hsrp
Modification
This command was introduced.
Description
Creates and activates an HSRP group.
Displays the status of features on a switch.
Displays HSRP information.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
feature hsrp
127